Self-adhesive Shelter Off-Road protection is a composite shock and scratch resistant transparent compound with visco-elastic behaviour. Shelter Off-Road widely increases the shock-resistance of carbon-fiber or metal structures it's applied toFeatures : protects against scratches and shocks easy to apply lightweight perfect adhesion also on curved surfaces doesn't turn yellow over time visco-elastic behaviour reduced vibrations Shelter Roll Off-Road (54 mm x 1 m, 1,2 mm thick)Easy to apply : 1. After removing cables or other interfering elements, clean the area where you want to apply Shelter with alcohol and a clean cloth. Remove traces of dried-up alcohol with a clean, dry cloth. 2. Take the suitable pre-cut Shelter element or cut a custom made Shelter piece, without removing the backing paper. 3. Peel Shelter backing paper on a length of 1 inch/25 mm, freeing the adhesive surface (DO NOT TOUCH THE ADHESIVE SURFACE WITH YOUR FINGERS). 4. Stick the adhesive surface of Shelter on the area you want to protect by applying a firm and constant pressure with your thumbs. 5. Remove the rest of Shelter backing paper progressively, as you position and attach your Shelter element on the area you want to protect. Starting from the center, use your thumbs to push Shelter down, slowly working your way to the sides and applying a constant pressure.
