Web exclusive

Two-person trekking tarp tent MT900, lightweight and compact

4.3

Our bivvy style tarp tent is an ultra-light solution for experienced adventurers on multi-day trips and expeditions. Save on precious pack weight by only using your hiking poles to pitch.

ID 8803942

Sold and shipped by

No import fees or delays apply.
Checkout as a member and get more time to return products in case you change your mind.
Enjoy long-lasting quality. Our products come with a standard 2-year warranty.

How to get it

Two-person trekking tarp tent MT900, lightweight and compact 1/39

Two-person trekking tarp tent MT900, lightweight and compact 2/39

Two-person trekking tarp tent MT900, lightweight and compact 3/39

Two-person trekking tarp tent MT900, lightweight and compact 4/39

Two-person trekking tarp tent MT900, lightweight and compact 5/39

Two-person trekking tarp tent MT900, lightweight and compact 6/39

Two-person trekking tarp tent MT900, lightweight and compact 7/39

Two-person trekking tarp tent MT900, lightweight and compact 8/39

Two-person trekking tarp tent MT900, lightweight and compact 9/39

Two-person trekking tarp tent MT900, lightweight and compact 10/39

Two-person trekking tarp tent MT900, lightweight and compact 11/39

Two-person trekking tarp tent MT900, lightweight and compact 12/39

Two-person trekking tarp tent MT900, lightweight and compact 13/39

Two-person trekking tarp tent MT900, lightweight and compact 14/39

Two-person trekking tarp tent MT900, lightweight and compact 15/39

Two-person trekking tarp tent MT900, lightweight and compact 16/39

Highlights

Engineered to withstand the fiercest winds

We've tested nature to ensure that this tent stands firm, even in Force 8 winds, so you can embrace the elements!
Defying Downpours

Powerful waterproofing with a flysheet and bedroom groundsheet, you'll conquer any downpour.

Engineered to withstand the fiercest winds

We've tested nature to ensure that this tent stands firm, even in Force 8 winds, so you can embrace the elements!

easy transport
Total weight of 1.3 kg.Compact & compressible 4 L cover.Dimensions 35 x12 x11 cm
capacity
60 cm wide per person. Bedroom height 95 cm. 2 doors. 2 porches. 2 pockets
wind resistance
70km/hr (Force 8) wind resistance tested in a wind tunnel on a rotating platform
easy assembly / dismantling
Requires 2 hiking poles (110/120 cm). Pre-assembled bedroom and flysheet
waterproof
Water column (Schmerber): Flysheet > 2000 mm. Bedroom groundsheet > 3,000 mm
ventilation
Flysheet. 2 vents for air flow. Bedroom with mosquito net
repair
Inner bedroom and flysheet available as spare parts

Details

Design details

Waterproofing
Simond tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). The 20D polyester (PES) flysheet (2,000 mm rating) and 40D polyamide groundsheet (3,000 mm rating) have a polyurethane coating (inside) and silicone coating (outside). Seams taped with heat-sealed strips.
Repairs and After-sales service
All our tents are designed to be repairable. For this model, you will find in spare parts: - the flysheet (ref 8739747) - the inner bedroom (ref 8739744 or 8812310, greige model) Information at your Decathlon store workshop or on the internet (decathlon.fr or https://support.decathlon.fr/)
Weight
Total weight 1.3 kg Separable parts to help transportation. Flysheet 550 g Bedroom 520 g Aluminium poles (2 pieces) 50 g Tent pegs (11 pieces) 116 g Guy ropes (3 pieces) 18 g Covers 40 g + 6 g To protect your product and increase your protection from the ground and the elements, you can complement your MT900 2P tarp tent with the MT900 2P groundsheet, reference: 8919463 (270 g).
Architecture, tent poles and tent pegs
This tent tarp requires 2 hiking poles (ideal height 115 cm - max 120 cm) to make its structure. These poles are not supplied with the tent. You can also use the two-pole kit (ref.: 8973633). The pegs are made from 7075 T6 aluminium and have an extremely resistant “anvil” head. This design makes for a very light tent that needs to be fixed to the ground, as it does not stay up alone.
And to disassemble it
This job is very simple. You just have to remove the 2 poles which constituted the structure of the tent, then, once the guy wires are undone and the sardines removed from the ground, to fold the tent taking into account the width of the cover. Tip: Leave the two stakes in position to save time when you assemble it next time!
Ventilation and condensation prevention
Top ventilation on each side near the doors. Upper part of the bedroom in mosquito net mesh to facilitate air flow. Water repellent fabric around the outside of the bedroom to protect against condensation and draughts. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched, and the air vents open.
Wind resistance
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 70km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
Size and living space
Bedroom length 225 cm Bedroom width 125 cm to the head and 105 cm to the feet. Room height 95 cm 2 aluminium stakes (composed of 2 sections each) located at the feet to increase the usable space. Two 60 cm-deep side canopies (storage space between the bedroom and flysheet) can each accommodate a backpack of about 50 to 60 litres, mountain equipment and a pair of hiking boots. 2 pockets in bedroom.
Durability
Your tent is designed for touring bivouacs, not for static day use. Avoid leaving it in direct sunlight as much as possible because the ultra-light fabrics can be sensitive to UV rays, which weaken them.
Turn this tarp tent into a real tent with our pole kit
If you don’t use hiking poles on your excursion, by bikepacking for example, our pole kit for tarp tents (sold separately, reference: 8973633) is available for purchase.
Assembly tips
Start by adjusting your poles to 115 cm in length. Then drive the tent pegs into the ground at the four corners of the tarp tent. Given that the flysheet and bedroom are pre-assembled, each of the poles must be slid under the flysheet, directly above each of the doors. That's how you pitch your tarp tent! Then put the 2 aluminium stakes in the spaces provided at the foot of the tent. Now you just have to attach the guy lines and tighten them (the height of the poles can be adjusted).
Seasons
3-season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure. In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.

Minimal tent for maximum adventure

To increase waterproofness and tent durability

Groundsheet MT900 for 2-person tent - Black
34.90

Two-person trekking tarp tent MT900, lightweight and compact

How to get it

Highlights

Features

Details

Design details

Specifications

Details

Composition

Manufacturer

Usage & care

To increase waterproofness and tent durability

Details

Design details

Specifications

Details

Composition

Manufacturer

Specifications

Details

Composition

Manufacturer

Usage & care

How to use

How to repair or replace

5 years. All our tents are repairable. Parts and information in store or on our website

Care instructions

Storage

Cleaning

Specifications

Details

Composition

Manufacturer

How to use

How to repair or replace

5 years. All our tents are repairable. Parts and information in store or on our website

Care instructions

Storage

Cleaning

Highlights

To increase waterproofness and tent durability