Measured comfort temperature: Static: -4°C. when moving: -13°C
One-piece, 100% waterproof clog Water repellent upper
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Traction on snow thanks to the location and depth of the 4.5 mm studs
Boot opens easily without adjustments making it easier to use
Upper of: 60.0% Styrene Ethylene Butadiene Styrene, 40.0% Polyester |
Lining and sock of: 100.0% Polyester |
Outer sole of: 100.0% Styrene Ethylene Butadiene Styrene |
This contact is responsible for product safety compliance. For help with an order or return, please contact customer service
DECATHLON
DECATHLON SE
4, boulevard de Mons 59665 VILLENEUVE D’ASCQ
Upper of: 60.0% Styrene Ethylene Butadiene Styrene, 40.0% Polyester |
Lining and sock of: 100.0% Polyester |
Outer sole of: 100.0% Styrene Ethylene Butadiene Styrene |
This contact is responsible for product safety compliance. For help with an order or return, please contact customer service
DECATHLON
DECATHLON SE
4, boulevard de Mons 59665 VILLENEUVE D’ASCQ
Once rinsed and dry, store them in a ventilated room away from light and humidity.
Rinse in clean water after each use.
Dry in a dry and ventilated place.
Keeping your boots waterproof
The water repellent coating on your boots needs to be renewed from time to time. Products (spray or liquid) for this purpose are available in our stores or by searching on our website by using product code: 307629
To get the most out of our boots, we recommend following these key principles:
We recommend the following principles to maximise the benefits of our boots:
Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie. This location means we can test our products on a wealth of varied and demanding terrain.
Tested in the lab
The Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together four themes, each with its own area and technological tools:
And in the great outdoors
To meet your requirements, Quechua products are rigorously tested in the mountains in conditions you’re likely to encounter during your hikes – such as wind, snow and rain. Our field test engineer and product manager, as well as a panel of testers, put all products through their paces throughout their development until they hit the shelves.
Refined for regular use
When refining the design for these boots, we tested a lot of things to make sure the construction would last you through many hikes. This included testing the following elements: tearing eyelets and straps, glueing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
Warm feet in cold temperatures
These women’s mid-boot wellies will keep your feet warm and comfortable even in temperatures as low as -13°C.
Dry feet are happy feet
A waterproof bottom clog and a supple water-repellent upper section around the ankle and calf keep feet dry and snug.
No slipping or sliding
Our special Snowcontact technology guarantees good grip in shallow or packed snow, with studs providing extra traction.
Warm feet in cold temperatures
These women’s mid-boot wellies will keep your feet warm and comfortable even in temperatures as low as -13°C.
