Web exclusive
Climbing abseil system Beal Escaper textile 90 g
To retrieve a rope from the bottom, this fully textile system weighs about 90 g and meets the EN 795B standard.
Sold and shipped by Sports LAB
The BEAL ESCAPER is a monoblock system made of rope and sewn strap allowing for a rappel on a single strand and safely retrieving the rope afterward. Its textile design makes it extremely lightweight and compact for easy transport in multi-pitch climbing, mountaineering, or rescue.
The ESCAPER combines polyamide rope and strap (Dyneema) with a pre-mounted prusik. Approximate weight 90g, dimensions 14cm x 5.5cm, ensuring a low footprint in the bag without compromising robustness.
Works on most rope diameters (practical compatibility from Ø7.3mm) and supports descents up to 80m when friction remains limited. Certified strength 18kN (1800kg) and compliance EN795B.
The system requires a minimum tension of about 10kg to avoid slip initiation; total release results in limited slipping of a few centimeters, and about 50cm of slipping is needed to release the mechanism. To retrieve the ESCAPER, pull and release on average 8 times on the rope until the device disengages and descends with the rope.
Mainly intended for single rope descent, single strand retrieval in multi-pitch climbing or mountaineering, and rescue situations (cut rope strand). Follow the installation protocol: setup according to the instructions, end knot, attachment in the ring, verification by the partner, and undo the final knot by the last descender before retrieval.
BEAL
This contact is responsible for product safety compliance. For help with an order or return, please contact customer service
BEAL
BEAL BEAL
Vienne, 2 Rue Rabelais, 38200, Francie
info@beal-planet.com
BEAL
This contact is responsible for product safety compliance. For help with an order or return, please contact customer service
BEAL
BEAL BEAL
Vienne, 2 Rue Rabelais, 38200, Francie
info@beal-planet.com
